If it is/was an original Husqvarna rifle on a older Mauser action, in 7mm it is likely a 7圆1 S&H, possibly rechambered to 7 Rem mag. I don't think Husky ever made a 7mm Remington mag in an FN action, if that's what you have. I have one here I'll post a picture tonite so you can compare the receiver. If you have an action and it says made in Belgium on the left side wall, then it is M98 (FN), it will likely have SWEDEN stamped on the top of the front ring. All Huskys are Mauser type actions, but all aren't M98's. If you need a bolt, you need to know if the action is a M96 small ring, or M98 (FN), large ring. If you need an action it will cost about $500, complete with the bolt assembly, trigger and magazine with bottom metal. Is there a magazine and trigger with this stock and barrel? Am I missing something? Thanks in advanceDo you have just a stock and barrel or do you have a receiver without a bolt assembly? I can't imagine why you would buy just a barrel and stock without the action? Unless of course you have an action. Anyone have suggestion on this, such where to find a barrel and action combo or separate pieces? Anyone every had luck getting something like this assembled? I think the receiver & bolt action assay I need to find is a mauser-type actions, but I am not completely sure. However, I only got the stock and barrel - both in great shape. I picked up a Husqvarna Vapenfabriks Ab Nitro 7mm Rem at a yard sale. You've got a nice project there, not the first time that I've had a project where it's a case of the tail wagging the dog! Didn't mention headspace, either, and that may mean having the barrel set back and a new chamber cut. Some Mausers will slip right together, others the barrel won't index up right, and the fit between the inner and outer shoulder has to be spot on for the thing to work right. The easiest way to score a useable action is to check the pawns for a Daly or Mark X commercial rifle in a magnum cartridge with a bad bore or finish issues.Īny way you elect to go, you'll be better off going to a gunsmith to have the thing put together. Next up is opening the bolt rails to feed the fat case, and most likely adding some length to the magazine box. There are good military M98 Mausers out there, BUT.there's also a bunch of work in the conversion! First up is that you'll have to open the bolt face to take the magnum rim size, and alter the extractor. I've not heard a lot of good said about their customer service.but I've also never dealt with them, personally, so can't say for sure. Sarco lists Husqvarna's, and if that is the way you elect to go, good luck!
0 kommentar(er)
